Personnel information

Full name: Assoc. Prof. Pham Quang

Position: Senior Lecturer

Belongs to the unit: Department of Materials Engineering

Email address: quang.pham@hust.edu.vn

Scientific background


INTRODUCTION

Pham Quang is a Associate Professor at Hanoi University of Science and Technology, Faculty of Materials Engineering. He completed his PhD in Applied Materials Engineering from Chungnam National University (Korea) in 2008, and Postdoctoral research at the Technical University Dresden (Germany) in 2015-2016. Recognized for his exceptional contributions, Dr. Pham has been appointed to the title of Associate Professor, Senior Lecturer in December 2022 at Hanoi University of Science and Technology. He has participated in multiple international research collaboration projects in recent years. He currently serves on the Editorial Boards of numerous publications and has been invited as a Keynote Speaker, Technical Committee Member, Session Chair, and Judge at international conferences.


RESEARCH FIELD

  • To study the science and technology of nano materials.
  • To study and manufacture materials and composite materials with high durability, such as: metals and light alloys (Aluminium, Magnesium, Titanium) and nanotube carbon fiber reinforced metal/carbon fiber composites by plastic deformation intense (SPD) to create materials with nano and micro structures.
  • To study the metal forming deformation of solid, Semi-solid.
  • To study the FVM, FEM for modeling and computational materials science: including ABAQUS, ANSYS-FLUENT, COMSOL MULTIPHISICS, ANSYS, DEFORM 2D & 3D, MSC.MARC and MSC.SUPERFORGE.


PUBLICATIONS

  1. Tran Thi Thu Hien, Nguyen Anh Tuan, Pham Quang*(2026), Effect of Basicity and Bentonite Binder on the Reduction Behavior and Microstructure of Iron Ore Briquettes, Ironmaking & Steelmaking (SCI-Q2), Accept (22-Jun-2026).
  2. Quang, P*., Bien, T. N., & Tuan, H. A.(2026). Numerical simulation and optimization of vacuum heat treatment for C-shaped SKD61 steel. Canadian Metallurgical Quarterly (SCI-Q2), 1–7.
  3. Duc, D. M., & Quang, P*. (2025). Numerical Simulation of the Solidification Process of Aluminum Alloys Using ABAQUS Finite Element Software. European Journal of Applied Sciences, Vol - 13(04). 223-230.
  4. Pham Quang (2025), Numerical modeling and simulation of mold filling and solidification process of BS100 Grade A6 alloy in sand casting of excavator bucket coupling parts , SCIREA Journal of Materials. Volume 10, Issue 1, 25-35.
  5. Nguyen, H., Le, D., Hoang, Q., & Quang, P*.(2024). Numerical simulation and experimental study on effect of cooling rate on microstructure and strength of nanostructured materials. Vietnam Journal of Science and Technology (Scopus), 63(5), 960–971.
  6. Quang, P. (2024). Finite Element Axisymmetric Models for Conical Wedge Anchorage Used in the Production of Prestressed Steel Reinforced Concretes. Advances in Materials, 13(2), 31-36.
  7. Soung Yeoul Ahn, Dong Geun Kim, Jeong Ah Lee, Eun Seong Kim, Sang Guk Jeong, Rae Eon Kim, Jungho Choe, Soon-Jik Hong, Pham Quang, Sunghak Lee, Hyoung Seop Kim (2023), Dynamic compression behavior of CoCrFeMnNi high-entropy alloy fabricated by direct energy deposition additive manufacturing, Journal of Alloys and Compounds 960, 170602 (SCI, Q1)
  8. P Quang (2022), The ECAP Process Simulation and Experiments with Different Back Pressures for Magnesium Alloy, J. Phys.: Conf. Ser. 2219 012011(Scopus).
  9. Quang Pham*, Pham Thi Thuy, Dang Thi Hong Hue, Hoang Thi Ngoc Quyen, Tran Thi Thu Hien, Dao Minh Ngung, (2021), Numerical simulation of the stress-strain during Constrained Groove Pressing process, Vietnam Journal of Science and Technology 59 (6A) 79-91.
  10. Quang, P*., Hao, P. T. (2020). The Preparation and Characterization of Cu/AA6061 multi-layer Composte produced by Accumulated Roll Bonding. IOP Conference Series: Materials Science and Engineering, 758, 012099. (Scopus)
  11. Thuy, P. T., Hue, D. T. H., Ngung, D. M., & Quang, P*. (2019). A Study on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy after Constrained Groove Pressing. In IOP Conference Series: Materials Science and Engineering(Vol. 611). Institute of Physics Publishing. (Scopus)
  12. Dang, H. T. H., Thuy, P. T., Ngung, D. M., Quang, P*., & Shchukin, V. Y. (2019). The deformation of AZ31 magnesium alloy during warm constrained groove pressing. Acta Metallurgica Slovaca, 25(1), 48–54.(ISI)
  13. Quang, PHAM*. (2019). The simulation of shear angle and deformations of Cu/Al composite sheets during accumulated roll bonding. In Materials Science Forum(Vol. 971 MSF, pp. 9–14). Trans Tech Publications Ltd. (Scopus)
  14. Nguyen Hong Hai, Pham Quang*. (2018) Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD). Advances in Materials. Vol. 7, No. 2, pp. 44-49.
  15. Due, D. M., Hai, N. H.,  Quang, P*. (2017). Simulation and experimental study on the steady conduction solution for continuous rheo-casting for A356 alloy. Journal of Korean Institute of Metals and Materials, 55(3), 202–20(SCIE, Q2)
  16. Pham Quang* and Do Minh Nghiep(2016), Numerical Simulation and Experimental Analysis of The Equal Channel Angular Pressing of Pure Titanium, Korean J. Met. Mater., 54-3 217-223. ISSN 1738-8228(SCIE, Q2)
  17. Pham Quang*, Do Minh Nghiep and Hyoung Seop Kim(2015), Simulation of the Effective of Friction on the Deformation in Equal Channel Angular Pressing (ECAP), Key Engineering Materials, 656-657 (2015) 526-531. ISSN 1662-9795(Scopus)
  18. Pham Quang*, Do Minh Nghiep and Yong Jin Kim(2015), Simulation of Effective Stress and Temperature Field of the Die and Workpiece during ECAP of pure Titanium at different Ram speeds by Finite Volume Method, Key Engineering Materials, 656-657 (2015) 532-537. ISSN 1662-9795(Scopus)
  19. P. Quang, A. Krishnaiah, S.I.Hong and H.S.Kim(2009), Coupled Analysis of Heat Transfer and Deformation in Equal Channel Angular Pressing of Al and Steel, Mater. Trans., 50, 1, 40 – 43, ISSN: 1347-5320(SCI, Q2)
  20. S.C.Yoon, P.Quang and H.S.Kim(2008), Deformation and fracture behavior of Magnesium during ECAP by numerical method, The Journal of Korean Institute of Metals and Materials (KIMM), Vols. 46 No. 3, pp. 144-149, ISSN: 1738-8228(SCIE, Q2)
  21. P. Quang, Y.G.Jeong, S.C.Yoon, S.H.Hong and H.S.Kim (2007), Consolidation 1 Vol% Carbon Nanotube Reinforced Metal Matrix Nanocomposites via Equal Channel Angular Pressing, Journal of Materials Processing Technology,(SCI, Q1)
  22. C.Yoon, P.Quang, S.I.Hong, H.S.Kim (2007), Die Design for Homogeneous Deformation during Equal Channel Angular Pressing, Journal of Materials Processing Technology, Vols. 187-188, pp. 318-320, (SCI) ISSN: 0924-0136,(SCI, Q1).
  23. P. Quang, S.C Yoon, C.H.Bok, and H.S.Kim (2007), Multi-Scale Modelling Scheme for Carbon Nanotube Reinforced Metal Matrix Composites, Key Engineering Materials Vols. 345-346, pp. 1261-1264, (ISI)ISSN: 1013-9826. (Scopus)
  24. P. Quang, Y.G.Jeong, S.C.Yoon, S.I.Hong, S.H.Hong and H.S.Kim (2007), Carbon Nanotube Reinforced Metal Matrix Nanocomposites Via Equal Channel Angular Pressing, Materials Science Forum Vols. 534-536, pp. 245-248, ISSN: 0255-5476(Scopus)
  25. P. Quang, S.C.Yoon, S.I.Hong and H.S.Kim (2006), Three Dimensional Numerical Investigation of Equal Channel Multi-Angular Pressing, Materials Science Forum Vols. 503-504, pp. 931-936, ISSN: 0255-5476. (Scopus)
  26. Quang, Y.G.Jeong, S.H.Hong and H.S.Kim (2006), Equal Channel Angular Pressing of Carbon Nanotube Reinforced Metal Matrix Nanocomposites, Key Engineering Materials Vols. 326-328, pp. 325-328, ISSN: 1013-9826, ISSN/ISO(Scopus)
  27. H.S.Kim, P.Quang, M.H.Seo, S.I.Hong, K.H. Baik and D.M.Nghiep(2004), Process Modelling of Equal Channel Angular Pressing for Ultrafine Grained Materials, Materials Transactions, Vols. 45, No. 7, pp. 1-5, ISSN: 1347-5320. (SCI, Q2).

You did not use the site, Click here to remain logged. Timeout: 60 second