INTRODUCTION
Assoc. Prof. Dr. Nguyen Hoang Viet is currently a senior lecturer and assistant to the Deans of the School of Materials Science and Engineering (MSE), Hanoi University of Science and Technology. Assoc. Dr. Nguyen Hoang Viet graduated as an engineer majoring in metallurgy at Hanoi University of Science and Technology in 2000; received a master’s degree in Materials Science, Hanoi University of Science and Technology in 2002; completed the PhD thesis majoring in Materials Science and Engineering, Ulsan University, Korea in 2009. Current research directions of Assoc. Dr. Nguyen Hoang Viet includes: Agglomerate technology of iron oxides, reduction kinetics in direct reduction and smelting reduction of iron ore, synthesis and application of Al-, Ti-, and Fe-based amorphous alloys and quasi-crystal alloys, HEA (High-entropy alloy) preparation by mechanical alloying and consolidation processes, and especially application of artificial intelligence (AI) in metallurgical industry.
TEACHING COURSES
- Direct reduction and smelting reduction of iron oxides.
- Sintering and pelletizing processes of iron ores
- Materials characterization/Methods for materials research
- Physical metallurgy
- Amorphous materials.
- Application of artificial intelligence (AI) in metallurgical industry
INTEREST AREAS
- Agglomerate technology of iron oxides
- Reduction kinetics in direct reduction and smelting reduction of iron ore
- Synthesis and application of Al-, Ti-, and Fe-based amorphous alloys and quasi-crystal alloys
- HEA (High-entropy alloy) preparation by mechanical alloying and consolidation processes
- Application of artificial intelligence (AI) in metallurgical industry.
TYPICAL SCIENTIFIC WORKS
Current projects:
- University project in 2020: Effect of rare-earth on the amorphization of Al-Fe-Re alloys prepared by mechanical alloying.
- MOIT project in 2023-2024: Study on the fabrication of AlMnCe-based nanostructured dual-phase alloy.
- MOET project in 2021-2022: Production of non-crystal Al-based alloys by mechanical alloying and spark plasma sintering.
Published papers:
- Hoang Viet Nguyen, Nam Binh Do, Thi Hoang Oanh Nguyen, Cao Son Nguyen, Van Trung Trinh, Hong Thang Le, Alberto Moreira Jorge Junior: Synthesis and magnetic properties of Al–Cu–Fe quasicrystals prepared by mechanical alloying and heat treatment, Journal of Materials Research 38, 644–653 (2023). https://doi.org/10.1557/s43578-022-00846-1
- Do Nam Binh, Nguyen Thi Hoang Oanh and Nguyen Hoang Viet: "Al-Fe-Ni Metallic Glasses via Mechanical Alloying and Its Consolidation" Appl. Sci. 2022, 12, 10561. https://doi.org/10.3390/app122010561
- Do Nam Binh, Nguyen Thi Hoang Oanh, Nguyen Hoang Viet: The effect of Ni and Ti additions on the glass forming ability and magnetic properties of Al-Fe-Y alloy prepared by mechanical alloying, Journal of Non-Crystalline Solids, Volume 583, 1 May 2022, 121478, https://doi.org/10.1016/j.jnoncrysol.2022.121478
- Hoàng Thị Ngọc Quyên, NGuyễn Hồng Hải, Trần Vũ Diễm Ngọc, Lê Thu Hà, Nguyễn Hoàng Việt, NGuyễn Dương Nam: Effect of Residual Stress Distribution on the Formation, Growth and Coalescence of Voids of 27Cr White Cast Iron under Impact Loading, MATERIALS TRANSACTIONS 2022 Volume 63 Issue 2 Pages 170-175, https://doi.org/10.2320/matertrans.MT-M2021161
- Nguyen Thi Hoang Oanh,Do Nam Binh,Dung Dang Duc,Quyen Hoang Thi Ngoc, Nguyen Hoang Viet: Nguyen Thi Hoang Oanh,Do Nam Binh,Dung Dang Duc,Quyen Hoang Thi Ngoc, Nguyen Hoang Viet, Materials 2021, 14(14), 3978; https://doi.org/10.3390/ma14143978
- Nguyen Hoang Viet, Pham Ngoc Dieu Quynh and Nguyen Thi Hoang Oanh: Reduction Kinetics of Mill Scale Briquettes by Using A3 Fine Coal as a Reductant; J. Nanosci. Nanotechnol (ISI), 21, pp. 2563-2567 (4/2021).
- Nguyen Thi Hoang Oanh and Nguyen Hoang Viet: The Cu Matrix Strengthened by TiH2-C In-Situ Synthesized via Mechanical Milling and Spark Plasma Sintering; J. Nanosci. Nanotechnol (ISI), 21, 2687-2691 (4/2021).
- Silva, M.-B.R.; Roche, V.; Blanco, T.M.; Viet, N.H.; Balancin, O.; Cabrera, J.-M.; Jorge, A.M., Jr.: Effect of Processing Conditions on the Microstructure, Mechanical Properties, and Corrosion Behavior of Two Austenitic Stainless Steels for Bioimplant Applications; Metals (ISI), 10 (10), 1311 (2020).
- Nguyen Minh Thuyet, Nguyen Hoang Viet, Le Thai Hung, Dang Quoc Khanh, Jin-Chun Kim: Properties of the interface between the as-built Ti–6Al–4V sample and the Ti substrate in selective laser sintering; International Journal of Modern Physics B (ISI), Vol. 34, No. 22, pp. 2040137 (2020).
- Nguyen Hoang Viet, Nguyen Thi Hoang Oanh: Microstructure and Electrical Property of Ex-Situ and In-Situ Copper Titanium Carbide Nanocomposites; Metals (ISI), 10 (6), 735 (2020);
- Nguyen Thi Hoang Oanh, Nguyen Hoang Viet: Precipitation of M23C6 Secondary Carbide Particles in Fe-Cr-Mn-C Alloy during Heat Treatment Process; Metals (ISI), 10 (2), 157 (2020).
- Nguyen Minh Thuyet, Viet Hoang Nguyen, Jin-Chun Kim: The Microstructural Revolution of Ti-6Al-4V Specimens Fabricated by Selective Laser Sintering of Pre-alloyed Powders”; VIETNAM JOURNAL OF SCIENCE AND TECHNOLOGY, Vol. 57, No. 3A, trang 103-111 (2019).
- Nguyen Hoang Viet: High-strength Al-based bulk alloy produced by spark plasma sintering of gas atomized powders; Journal of Science and Technology, số 135, trang 38-42 (2019).
- Nguyen Hoang Viet, Do Nam Binh, Pham Ngoc Dieu Quynh, Nguyen Thi Hoang Oanh: Crystallization of Al-Ni-La gas atomized powders; Tạp chí khoa học công nghệ kim loại, số 83, trang 43-46 (2019).
- Nguyen Hoang Viet, Nguyen Thi Hoang Oanh, Ji-Soon Kim and Alberto Moreira Jorge, Jr: Crystallization kinetics and consolidation of Al82La10Fe4Ni4 glassy alloy powder by spark plasma sintering; Metals (ISI), 8 (10), pp. 812 (2018).
- Nguyen Hoang Viet, Vu Nga Linh, Nguyen Thi Hoang: Microstructure investigation of spark plasma siniered nano-sized Cu powders; Tạp chí khoa học công nghệ kim loại, số 80, trang 35-43 (2018).
- Phan Hoang Linh, Hoang Thi Phuong Loan1, Bui Thi Tu Anh, Phung Van Manh, Nguyen Huu Dong, Le Hong Thang, Nguyen Quang Tung, Nguyen Thi Hoang Oanh, Pham Ngoc Dieu Quynh, Nguyen Hoang Viet: Reduction and swelling of iron ore pellets by A3 coal, Hội nghị về Vật liệu và Công nghệ Nano Tiên tiến-WANN, trang 50-56 (2017).
- Nguyen Thi Hoang Oanh, Nguyen Hoang Viet, Dina V. Dudina, Alberto Moreira Jorge Jr, Ji-Soon Kim: Structural characterization and magnetic properties of Al82Fe16TM2 (TM: Ti, Ni, Cu) alloys prepared by mechanical alloying; Journal of Non-Crystalline Solids (ISI), Vol. 468, pp. 67-73 (2017).
- Oanh Nguyen Thi Hoang, Viet Nguyen Hoang, Ji-Soon Kim and Dina V. Dudina: Structural Investigations of TiC–Cu Nanocomposites Prepared by Ball Milling and Spark Plasma Sintering; Metals (ISI), 7 (4), pp. 123 (2017).
- Nguyen Thi Hoang Oanh: Nguyen Hoang Viet, Ji-Soon Kim and Alberto Moreira Jorge Junior: Characterization of In-Situ Cu–TiH2–C and Cu–Ti–C Nanocomposites Produced by Mechanical Milling and Spark Plasma Sintering; Metals (ISI), 7 (4), pp. 117 (2017).
- Viet H. Nguyen, Oanh T. H. Nguyen, Dina V. Dudina, Vinh V. Le and Ji-Soon Kim: Crystallization Kinetics of Al-Fe and Al-Fe-Y Amorphous Alloys Produced by Mechanical Milling; Journal of Nanomaterials (IS), Article ID 1909108 (2016).
- Nguyen Hoang Viet, Pham Ngoc Dieu Quynh, Nguyen Thi Hoang Oanh: A study on the reduction of iron ore pellets in a bed of non-coking coal; Scientific Conference on Metallurgy and Materials Technology, pp. 185-200 (2016).
PUBLISHED BOOKS
- Công nghệ hoàn nguyên trực tiếp (Luyện kim phi lò cao) (in Vietnamese) – Direct Reduction Technology (Non-coking Blast Furnace)
