INTRODUCTION
Dr. Dang Thi Hong Hue is currently the main lecturer at the Materials School, Hanoi University of Science and Technology. Dr. Dang Thi Hong Hue graduated from University of Metallurgy and Materials Technology from Hanoi University of Science and Technology in 2002; received a Master's degree in Material Forming Technology, Hanoi University of Science and Technology in 2005; completed her PhD thesis in Materials Science, Hanoi University of Science and Technology in 2014. Current research directions Dr. Dang Thi Hong Hue includes: Research on mechanical properties, fracture mechanism, thermomechanical behavior of materials.
TEACHING COURSES
- Behavior Mechanical Heat Materials
- Mechanical Materials
- Machine Element Design
- Forming processing in materials
- Workshop project
- Production management and human resource management
- Atomic scale simulation
- Project Material selection
- Mold Design Project
- Graduation Project Guide
- Technical internship guide, graduate internship
FIELD OF STUDY
- Study of mechanical properties, genealogy mechanisms, thermomechanical behavior of materials.
- Fabrication of nanostructured materials
TYPICAL SCIENTIFIC WORKS
Some typical scientific topics:
- Key project (HUST) code TĐ2021-TĐ-01, 08/2021-07/2022, project leader, accepted.
- The project issued Code B2016-BKA-26, 01/2016-12/2017, the project leader, accepted.
- The project of issuance of Code B2023-BKA-02, 01/2023-12/2024, project leader, is ongoing.
- The project of issuance of Code B2010 - 01- 346, 01/2010-12/2011, project leader, is being implemented.
Some typical articles:
Magazine Web of Science:
- Hue Thi Hong Dang1), Pham Thi Thuy2), Dao Minh Ngung1), Pham quang1)*, Valery y. Shchukin3), The deformation of AZ31 magnesium alloy during warm constrained groove pressing, Acta metallurgica Slovaca, vol 25, no.1, 2019, p. 48-54, doi 10.12776/ams.v25i1.1218
- Dang Thi Hong Hue, Nguyen Ngoc Minh, Nguyen Hong Hai, Hoang Thi Ngoc Quyen*, Effects of the Destabilisation Heat Treatments on the Precipitation of Secondary Carbides and Their Effect on the Corrosion of 27 wt.% Chromium White Cast Iron, ISIJ International, Vol. 61 (2021), No. 5, pp. 1660–1668, https://doi.org/10.2355/isijinternational.ISIJINT-2020-581.
- Do Ngoc Tu, Van-Hai Dinh*, Le Van Lich, Dang Thi Hong Hue, Trong-Giang Nguyen. Effects of substrate bias voltage on structure of diamond-like carbon films on AISI 316L stainless steel: A molecular dynamics simulation study. Materials, (2021) Accepted (ISI Q2, IF=3.057).
- Le Van Lich* Tinh Quoc Bui, Takahiro Shimada, Takayuki Kitamura, Hue Dang Thi Hong, Trong-Giang Nguyen, and Van-Hai Dinh, Abnormal Electromechanical Property of Nonlinearly Graded Lead-Free Ferroelectric Thin Films. Adv. Theory Simul. 2021, 2100370.
- Dang Thi Hong Hue*, Van-Khanh Tran, Van-Lam Nguyen, Le Van Lich**, Van-Hai Dinh, Trong-Giang Nguyen, High strain-rate effect on microstructure evolution and plasticity of aluminum 5052 alloy nano-multilayer: A molecular dynamics study, Vacuum 201 (2022) 111104. https://doi.org/10.1016/j.vacuum.2022.111104.
- Minh-Tien Le,1 Phuong-Linh Do,1 Van-Tuan Le,2 Dang Thi Hong Hue,1 Van-Hai Dinh,1 Trong-Giang Nguyen,1 and Le Van Lich1, The origin of piezoelectric enhancement in compositionally graded ferroelectrics with sinusoidal variation. Appl. Phys. Lett. 121, 162905 (2022); https://doi.org/10.1063/5.0115482
- Le Van Lich, Dang Thi Hong Hue, Do Thi Huong Giang, Nguyen Huu Duc, Takahiro Shimada, Takayuki Kitamura, Van-Hai Dinh, Formation and switching of chiral magnetic field textures in three-dimensional gyroid nanostructures, Acta Materialia. DOI: 10.1016/j.actamat.2023.118802 online: 27-02-2023.
- Le Van Lich, Thuy-Huong Nguyen, Dang Thi Hong Hue, Tinh Quoc Bui, Trong-Giang Nguyen, Van-Hai Dinh, Manh-Huong Phan, The design of compositionall y modulate d lead -free ferroelectrics with larg e electromechanica l response vi a high -throughput phas e -fiel d simulation s an d machin e learning, Materials Research Bulletin, 10.1016/j.materresbull.2023.112433
International journals:
- Pham Thi THUY, Hue Thi Hong DANG , Dao Minh NGUNG, Pham QUANG*, The microstructure and mechanical properties of magnesium alloy AZ31 after Constrained Groove Pressing, IOP Conf. Series, Materials Science and Engineering 611 (2019) 012005 IOP Publishing doi:10.1088/1757-899X/611/1/012005.
- Dinh Van Hai, Dang Thi Hong Hue, Finite Element Simulation and Experimental Study on Internal Fracture of Railway Sleeper Screw during Cross Wedge Rolling Process, Materials Science Forum (Volume 804), pp -311-314, 2015, DOI: https://doi.org/10.4028/www.scientific.net/MSF.804.311
Domestic magazines:
- Dang Thi Hong Hue, Nguyen Van Lam, Tran Quang Thai, Nguyen Manh Thang. Effects of annealing temperature on the structure and mechanical properties of AA5038 aluminum alloy after deformation, National Congress of Solid State Physics and Materials Science – SPMS 2021, pp. 979 -982.
- Dang Thi Hong Hue, Dao Minh Ngung, Nguyen Trong Giang, Study on the influence of rolling technology parameters on the formation of product defects during horizontal wedge rolling, Journal of Metals, No. 50, October 2013.
- Dang Thi Hong Hue, Tran Van Dung, Ha Tien Hoang, Optimizing technological parameters of rolling bimetal copper alloy powder on copper-plated steel base for silver lining, Journal of Science and Technology of Technical Universities, No. 66, 35-39, 2008.
PUBLISHED BOOKS
- Dao Minh Ngung, Dang Thi Hong Hue, Design of rolling steel factory, Hanoi University of Science and Technology Press, publication number: 3462-2017/CXBIPH/01-77 BKHN, ISBN: 978-604-95-0324-5, Business registration number: 186/QD-ĐHBK-BKHN dated 122/10/2017,
MORE INFORMATION
Achievements and awards:
- Lecturer of sea pepper in 2021 QĐ No. 195/QD-ĐHBKHN-TCCB dated 11/01/2022 Hanoi University of Science and Technology.
- Certificate of Merit of Vietnam Education Union, No. 197/QD-CĐN dated July 24, 2019.
