Trường vật liệu

INTRODUCTION

• Lecturer
• Doctor (Materials Science, University of Ulsan, Korea, 2017)
• Master (Materials Science and Engineering, Hanoi University Science and Technology, 2009)
• Engineer (Metallurgy, Hanoi University Science and Technology, 2007) 

TEACHING COURSES

• Steel Making - undergraduate
• Basic Oxygen Steelmaking - undergraduate
• Materials Forming Technologies (Additive manufacturing) – undergraduate
• Advanced technology in manufacturing of steels and alloys - undergraduate
• Nanomaterials for Aerospace and Automobiles - undergraduate
• Alloying Design – undergaduate, Advanced program
• Materials Design – undergaduate, Advanced program

INTEREST AREAS

• Metallurgical technologies
• Additive manufacturing technologies
• Advanced materials and nanotechnologies
• Powder metallurgy and composite
• Advanced materials and processing

SCIENTIFIC PUBLICATION

• Nafosted with code: 107.99-2018.336:“ Investigation on the microstructure characterization and mechanical properties of stainless steel (grade 316L, 439), Co-Cr, Ti and Cu-Ni alloys fabricated by the 3D printing of metal technology with different process parameters.” – Under final evaluation.
• HUST with code: T2018-TĐ-007: “Study on synthesis of nanocomposite AgNWs/C3N4 for fabrication of  Membrane for Water” – official acceptance.

• Thai‐Hung Le, Van‐Son Le, Quoc‐Khanh Dang, Minh‐Thuyet Nguyen, Trung‐Kien Le and Ngoc‐Tam Bui, Microstructure Evaluation and Thermal–Mechanical Properties of ABS Matrix Composite Filament Reinforced with Multi‐Walled Carbon Nanotubes by a Single Screw Extruder for FDM 3D Printing, Applied Sciences, Vol.11, 8798, pp.1-11, 2021
• Nguyen, M.-T., H.-V. Nguyen, T.-H. Le, Q.-K. Dang, and J.-C. Kim: Properties of the interface between the as-built Ti–6Al–4V sample and the Ti substrate in selective laser sintering; International Journal of Modern Physics B (ISI), 34, pp. 2040137 (2020).
• Thuyet Minh Nguyen, H.T.L., Khanh Quoc Dang: Facile Decoration of Silver Nanowires Microstructure with Carbon Nitride Nanoparticles as a Membrane for Water Treatment; Acta Metallurgica Slovaca (ISI), 26 (3), pp. 100-103 (2020).
• Thuyet-Nguyen, M. and J.-C. Kim: Phase Structure and Magnetic Properties of Intermetallic Cu-Ni Alloy Nanopowders Synthesized by the Electrical Explosion of Wire; Archives of Metallurgy and Materials (ISI), Vol. 64, No. 3, pp. 893-898 (2019).
• Nguyen, M.T., J.H. Kim, and J.C. Kim: Formation of Different Cu Nanopowders and Stability of Cu Fluids Produced by Electrical Explosion of Wire in Liquid; Archives of Metallurgy and Materials (ISI), Vol. 63 (No. 3), pp. 1453-1457 (2018).
• Nguyen, M.-T., J.-H. Kim, J.-G. Lee, and J.-C. Kim: Phase Structures and Magnetic Properties of Graphite Nanosheets and Ni-Graphite Nanocomposite Synthesized by Electrical Explosion of Wire in Liquid; Metals and Materials International (ISI), 24 (4), pp. 821-829 (2018).
• Minh Thuyet Nguyen, Won Joo Kim, Vladimir An, Jin Chun Kim: Synthesis and Properties of Nickel/Carbon Nanotube Nanocomposites via the Electrical Explosion of Wire in Liquid and Spark Plasma Sintering Method; Journal of Nanoscience and Nanotechnology (ISI), 17 (10) (2017).
• Thuyet-Nguyen, M., J.C. Kim, W.J. Kim: Fabrication and Characterization of Ni-CNT Composites by Electrical Explosion of Wire in Different Liquids; Archives of Metallurgy and Materials (ISI), Vol. 62, No. 2 (2017).
• Thuyet-Nguyen, M., H. Hai-Nguyen, W.J. Kim, H.Y. Kim, and J.-C. Kim: Synthesis and characterization of magnetic of Ni/ABS nanocomposites by electrical explosion of wire in liquid and solution blending methods; Metals and Materials International (ISI), 23 (2), pp. 391-396 (2017).
• Nguyen, H.-H., M.-T. Nguyen, W.J. Kim, and J.-C. Kim: Synthesis and analysis of nanocrystalline β1-Cu3Al and β2-NiAl intermetallic-reinforced aluminum matrix composite by high energy ball milling. Metals and Materials International (ISI), 23 (1), pp. 202-206 (2017).

• Dong-Wan Lee, Minh-Thuyet Nguyen and Jin-Chun Kim: “Selective Laser Sintering of Co-Cr Alloy Powders and Sintered Products Properties”, Journal of Powder Materials, 30, pp. 07-12 (2023)
• Thuyet-Nguyen Minh, Hung-Le Thai: “Study on Selective laser melting of STS316L-Cu mixtured powder and its properties”, Proceedings of From Smart City to Smart Factory for Sustainable Future: conceptual framework, scenarios, and multidiscipline perspectives, pp. 25-26, (2023)
• Minh, T.-N. and K. Jin-Chun: Spark Plasma Sintering of the Ni-graphite Composite Powder Prepared by Electrical Explosion of Wire in Liquid and Its Properties. Journal of Korean Powder Metallurgy Institute, 27 (1), pp. 14 (2020).
• Chu Dac Phuc, Nguyen Minh Thuyet, Jin-Chun Kim: “Fabrication and Characterization of Immiscible Fe-Cu Alloys using Electrical Explosion of Wire in Liquid”, Journal of Korean Powder Metallurgy Institute, 27, pp.449-457 (2020)
• Minh Thuyet-Nguyen: Selective Laser Sintering of Ti-6Al-4V Powders Directly on the Substrate without Support Parts and Its Properties; Proceedings of the 2019 International Conference on “Physics, Mechanics of New Materials and Their Applications”, pp. 1-3 (2019).
• Nguyen Minh Thuyet, Duong Văn Thiet: Synthesis of AgNWs/g-C3N4 Nanocomposite via Hydrothermal and Mixing Route; Proceedings of The 4th International Conference on Advanced Materials and Nanotechnology, pp. 118-122 (2019).

• Nguyễn Minh Thuyết, Bùi Xuân Bách: “NGHIÊN CỨU SẢN XUẤT VÀ XỬ LÝ NHIỆT CHO MÁC THÉP 42CrMo ỨNG DỤNG TRONG CHẾ TẠO QUẢ LÔ ÉP VIÊN”, Hội nghị Vật lý Chất rắn và Khoa học Vật liệu Toàn quốc – SPMS 2021, pp. 951-955, (2022)
• Nguyễn Trường Huy, Nguyễn Sơn Lâm, Nguyễn Hoàng Việt, Nguyễn Minh Thuyết: “Nghiên cứu sự cháy hao của các nguyên tố hợp kim Ti và Al trong công nghệ tinh luyện  điện xỉ”, KHOA HỌC - CÔNG NGHỆ KIM LOẠI (JOURNAL OF SCIENCE AND TECHNOLOGY OF METALS), 94, pp.8-13 (2021)
• Le Thai Hung, Le Van Son, Nguyen Tuan Huy, Hoang Nguyen Ky, Le Manh Cuong, Nguyen Van Dat, Nguyen Minh Thuyet, Microstructure and tensile strength evaluation of polypropylene matrix composite filament reinforced with titanium hydride powder by a single screw extruder for using in FDM 3D printing, J. Science and Technology of Metals, 1859-4344, Vol.90, pp. 19-22, 2020
• Thuyet Minh Nguyen, Jin-Chun Kim: The Microstructural Revolution of Ti-6Al-4V Specimens Fabricated by Selective Laser Sintering of Pre-alloyed Powders, VIETNAM JOURNAL OF SCIENCE AND TECHNOLOGY, 57 (3A), pp. 103-111 ( 2019).

PUBLISHED BOOKS

• None

OTHER INFORMATION

• Post doctoral schoolarship at University of Ulsan, Korea, 2017 - 2018.