CÁC CÔNG TRÌNH CÔNG BỐ TIÊU BIỂU

Bài báo Web of Science từ năm 2021 đến nay:

1. Dang Thi Hong Hue, Nguyen Ngoc Minh, Nguyen Hong Hai, Hoang Thi Ngoc Quyen, Effects of the Destabilisation Heat Treatments on the Precipitation of Secondary Carbides and Their Effect on the Corrosion of 27 wt.% Chromium White Cast Iron, ISIJ International, Vol. 61 (2021), No. 5, pp. 1660–1668.
2. Le Van Lich, Tinh Quoc Bui, Takahiro Shimada, Takayuki Kitamura, Hue Dang Thi Hong, Trong-Giang Nguyen, and Van-Hai Dinh, Abnormal Electromechanical Property of Nonlinearly Graded Lead-Free Ferroelectric, Thin Films. Adv. Theory Simul., 2021, 2100370.
3. Dang Thi Hong Hue, Van-Khanh Tran, Van-Lam Nguyen, Le Van Lich, Van-Hai Dinh, Trong-Giang Nguyen, High strain-rate effect on microstructure evolution and plasticity of aluminum 5052 alloy nano-multilayer: A molecular dynamics study, Vacuum, 2022, 201, 111104.
4. Minh-Tien Le, Phuong-Linh Do, Van-Tuan Le, Dang Thi Hong Hue, Van-Hai Dinh, Trong-Giang Nguyen, and Le Van Lich, The origin of piezoelectric enhancement in compositionally graded ferroelectrics with sinusoidal variation. Appl. Phys. Lett., 2022, 121, 162905.
5. Le Van Lich, Dang Thi Hong Hue, Do Thi Huong Giang, Nguyen Huu Duc, Takahiro Shimada, Takayuki Kitamura, Van-Hai Dinh, Formation and switching of chiral magnetic field textures in three-dimensional gyroid nanostructures, Acta Materialia, 2023, 118802.
6. Le Van Lich, Thuy-Huong Nguyen, Dang Thi Hong Hue, Tinh Quoc Bui, Trong-Giang Nguyen, Van-Hai Dinh, Manh-Huong Phan, The design of compositionally modulated lead-free ferroelectrics with large electromechanical response via high throughput phase field simulations and machine learning, Materials Research Bulletin.
7. Hoang Viet Nguyen, Nam Binh Do, Thi Hoang Oanh Nguyen, Cao Son Nguyen, Van Trung Trinh, Hong Thang Le, Alberto Moreira Jorge Junior, Synthesis and magnetic properties of Al–Cu–Fe quasicrystals prepared by mechanical alloying and heat treatment, Journal of Materials Research, 2023, 38, 644–653.
8. Do Nam Binh, Nguyen Thi Hoang Oanh and Nguyen Hoang Viet, Al-Fe-Ni Metallic Glasses via Mechanical Alloying and Its Consolidation, Appl. Sci. 2022, 12, 10561.
9. Do Nam Binh, Nguyen Thi Hoang Oanh, Nguyen Hoang Viet, The effect of Ni and Ti additions on the glass forming ability and magnetic properties of Al-Fe-Y alloy prepared by mechanical alloying, Journal of Non-Crystalline Solids, Volume 583, 2022, 121478.
10. Nguyen Thi Hoang Oanh, Do Nam Binh, Dung Dang Duc, Quyen Hoang Thi Ngoc, Nguyen Hoang Viet, Effect of Transition Elements on the Thermal Stability of Glassy Alloys 82Al-16Fe-2TM (TM: Ti, Ni, Cu) Prepared by Mechanical Alloying, Materials, 2021, 14(14), 3978.
11. Le Hong Thang, Le Thi Bang, Bui Duc Long, Nguyen Anh Son, S. Ramesh, Effect of carbonate contents on the thermal stability and mechanical properties of carbonated apatite artificial bone substitute, Journal of Materials Engineering and Performance 32 (3), 1006-1016.
12. L. T. Bang, S. Ramesh, Bui Duc Long, Nguyen Anh Son, Tran Bao Trung, S.  Sivakumar, Effect of temperature on the characteristics of β-tricalcium phosphate for use as bone substitute material, Journal of Engineering Science and Technology, Vol. 17, 2022, No. 2, 1577 – 1588.
13. LT Bang, Long Bui Duc, Trung Trinh Van, Van Thanh Nguyen T., Ramesh S. Nanocrystalline hydroxyapatite prepared at different precursor concentrations: thermal stability, morphology and in vitro cellular response, Ceramics-Silikáty, 66 (1), 2022, 19-27.
14. LT Bang, S Ramesh, BD Long, NA Son, M Munar, and X Shi, Effect of MgO addition on the sinterability, mechanical properties and biological cell activities of sintered silicon-substituted hydroxyapatite, Journal of the Australian Ceramic Society, 2021, 57(3), p. 857-868.
15. L Xu, J Ren, J Lu, X Tong, T Zhao, LT Bang, X Shi, Preparation of double linked waterborne epoxy resin coating using Titanium curing agent and aminopropyltriethoxysilane and its anticorrosive properties, Int. J. Electrochem. Sci., 16, 2021, Article ID: 210768.
16. AN Natasha, S Ramesh, CY Tan, LT Bang, Sinterability of Calcium Phosphate Through Rapid Sintering J. Phys.: Conf. Ser. 1892, 2021, 012038.
17. Son Anh Nguyen, Khanh Pham Gia, Christian Setdel, Anh Hoang Pham, Cuong Phung Nhu, Trung Trinh Van, Change in microstructure and hardness of 3D-printed AISI H13 steel by heat treatment and nitriding processes, Acta Metallurgica Slovaca, pp. 1335-1532, 6/2023
18. L Hong Thang, L.T. Bang, B.D. Long, N.A. Son and S Ramesh, Effect of Carbonate Contents on the Thermal Stability and Mechanical Properties of Carbonated Apatite Artificial Bone Substitute, Journal of Materials Science and Engineering, 2022, Springer.
19. Nguyen Ngoc Minh, Hoang Thi Ngoc Quyen, Tran Thi Xuan, Fabrication of nickel magnetic nanoparticles by combination of polyol and hydrothermal processes, Digest Journal of Nanomaterials and Biostructures, Vol 17 (2022), No. 2, pp 597-605.
20. Nguyen Ngoc Minh, Synthesis of biphasic calcium phosphate minerals from shells of poker-chip venus, Ceramics – Silikáty, Vol 65 (2021), No. 3, pp 281-284.
21. Thi Xuan Tran, Xuan Phuong Nguyen, Duong Nam Nguyen, Dinh Toai Vu, Minh Quang Chau, Osamah Ibrahim Khalaf and Anh Tuan Hoang, Effect of Poly-Alkylene-Glycol Quenchant on the Distortion, Hardness, and Microstructure of 65Mn Steel, Computers, Materials & Continua, vol.67, no.3, 2021
22. Xuan Thi Tran, Anh Hoang Pham, Vuong Van Hoang, and Toai Dinh Vu, Stress and Distortion of 100Cr6 Steel after Quenching in Aqueous 4% Polyvinylpyrrolidone Solution, Journal of Materials Engineering and Performance (JMEPEG), vol.31, 2022, Issue 2, 1-17.
23. Van Vuong Hoang and Van Trung Trinh, 2D Strain Mapping in Sub-10 nm SiGe Layer with High-Resolution Transmission Electron Microscopy and Geometric Phase Analysis, Nano Hybrids and Composites, 37, 2022, 41-47.
24. Thanh Van Nguyen, Van Thanh Doan, Trung Van Trinh, Huy Van Vu, Characteristics of AISI 420 stainless steel modified by combining gas nitriding and CrN coating, Acta Metallurgica Slovaca, 27, 2021, 146-151.
25. Vu Diem Ngoc Tran, Lai Hoang Vu, Vinh Le Van, Nguyen Ba Hung, Ky Nam Pham, and Thi Hinh Dinh, Structure evolution and electrical properties of leadfree Bi0.5Na0.41K0.09TiO3 piezoceramics by isovalent La doping, Journal of Materials Science: Materials in Electronics, 32, 2021, pp. 4363–4371.
26. BuiDuc Long, LeHong Thang, NguyenHong Hai, Koichiro Suekuni, Katsuaki, Thermoelectric quaternary sulfide Cu2+xZn1−xSnS4 (x = 0–0.3): Effects of Cu substitution for Zn, Materials Science and Engineering B, 272, 2021, 115353.
27. Quyen V. Vu, Trang T. T. Vu, Cuong M. Doan, Binh N. Duong, Huy D. Tran, Silicothermic Reduction of Thanh Hoa Dolomite: Thermodynamic And Experimental, Acta Metallurgica Slovaca, Vol. 27, 2021, No. 3, 109-113.
28. Anh-Hoa Bui, Duc-Chinh Le, Thi-Thao Nguyen: Synthesis of ZnO nanoparticles from electric arc furnace dust; Journal of Mining and Metallurgy, Section B – Metallurgy, 2022, 58, 2, 253-260
29. Cao-Son Nguyen, Thu-Hien Nguyen, Anh-Hoa Bui, Decreasing mechanical properties of the superheater steel grade P22 heated at elevated temperature under constant stress; Acta Metallurgica Slovaca, Vol. 28, No. 4, pp. 197-202.
30. Hoang Anh Tuan, Nguyen Hong Hai, Nguyen Huu Dung, Tran The Nam, Nguyen Duong Nam, Austenitization and formation of ausferrite structure in austempered ductile iron with dual matrix, 2022, Mater. Res. Express, Vol. 9, No.4.
31. Nguyen Duong Nam, Le Thi Nhug, Vu Anh Tuan, Nguyen Hong Hai, Pham Mai Khanh, Investigation of Microstructures Changing in High Manganese Steel Mn15Cr2V after Heat Treatment and Impacted Load, Materials Transactions, Vol. 63, 2022, Iss. 4, pp. 450-457.
32. Pham Mai Khanh, Vu Anh Tuan, Le Thi Nhung, Nguyen Duong Nam, The Influence of Thermal-Mechanical Treatment on Phase Transformation and Shape Memory Effect of CuAl9Fe4Ni2 Alloy. Materials Research Express, Vol. 7, 2021, Iss. 10.
33. Hoang Thi Ngoc Quyen, Nguyen Hong Hai, Tran Vu Diem Ngoc, Le Thu Ha, Nguyen Hoang Viet, Nguyen Duong Nam, Effect of Residual Stress Distribution on the Formation, Growth and Coalescence of Voids of 27Cr White Cast Iron under Impact Loading, Materials Transactions, 2022, Vol.63, No.2, p.170.
34. Hoang Thi Ngoc Quyen, Nguyen Hong Hai, Nguyen Duong Nam, Effect of Molybdenum on the corrosion process of white cast iron 27% chromium, Chiang Mai Journal of Science, Vol. 48, 2021, No. 4.
35. Le Van Lich, Ha Thi Dang, Van-Hai Dinh, Polar toron structure in ferroelectric core-shell nanoparticles, Scripta Materialia, 236, 2023, 115641.
36. Le Van Lich, Van-Hai Dinh, Trong-Giang Nguyen, Manh-Huong Phan, Theoretical studies on controlling the chirality of helical polarization vortices in ferroelectric nanowires: implications for reconfigurable electronic devices, ACS Applied Nano Materials, 5 (11), 2022, 16509-16518.
37. Le Van Lich, Minh-Tien Le, Ngoc-Lu Vu, Hong-Dang Nguyen, Van-Tuan Le, Minh-Tan Ha, Trong-Giang Nguyen, Van-Hai Dinh, Direct switching of polarization vortex in triangular ferroelectric nanodots: Role of crystal orientation. Physical Review B, 2021, 104, 024104.